Super Strong, Permanent Magnets with Attractive Chrome or Decorative White Covers.
Hang and Mount Signs & Displays on Any Flat Steel Surface.
ROUND MAGNETS
with Chrome Plated Covers
|
|
|
|
|
MOUNTING BASE
Chrome Plate with Foam Adhesive Backing
To install, place on Square or Cylinder Magnet mounted on
Versa-Tool Piggy Back Adapter. Apply to a clean, flat surface and allow
adhesive to set for 24 hours prior to use.
|
SQUARE MAGNETS
with White Plastic Covers
|
CYLINDER MAGNETS
with White Enamel Finish
|
NAMETAG MAGNET
|
|
|
|
|
Low profile (.140" thick, thinner available). Two pieces. One flat piece with 2 round, permanently-
attached magnets, plus one plated Keeper Bar. To use, attach nametag to magnets, then place Keeper Bar inside clothing. |
MAGNETS
| |
PRICE EACH |
| ITEM |
DESCRIPTION |
HOLDS UP TO |
SIZE |
1 |
10 |
50 |
100 |
500 |
1K |
| MAR-L |
Magnet with 1/8" hole |
7 lbs. |
1 ¼" D |
.70 |
.51 |
.47 |
.43 |
.39 |
.35 |
| MAR-U |
Magnet with sign holder |
7 lbs. |
1 ¼" D |
.90 |
.70 |
.65 |
.60 |
.55 |
.50 |
| MAR-J |
Magnet with sign holder |
7 lbs. |
1 ¼" D |
.90 |
.70 |
.65 |
.60 |
.55 |
.50 |
| MAR-P |
Wht Magnet with Hook ** |
9 lbs. |
1" D |
1.03 |
.99 |
.97 |
.95 |
.93 |
.90 |
| MAR-H |
Wht Magnet with Hook |
14 lbs. |
1 ¼" D |
1.20 |
1.15 |
1.11 |
1.07 |
1.02 |
.95 |
| MAR-V |
Wht Magnet with Hook ** |
35 lbs |
2" D |
6.75 |
6.25 |
5.75 |
5.25 |
4.75 |
4.25 |
| MAS |
Square magnet, White |
5 lbs. |
½x½ |
1.40 |
1.35 |
1.30 |
1.27 |
1.24 |
1.21 |
| MAL |
Long Magnet, White |
15 lbs |
½ x 1" |
3.25 |
3.20 |
3.15 |
3.10 |
3.05 |
3.00 |
| MAG-S |
Wht HI-NRG Mag & Hook |
7 lbs. |
½" D |
1.40 |
1.35 |
1.30 |
1.20 |
1.10 |
.90 |
| MAG-L |
Wht HI-NRG Mag & Hook |
28 lbs |
1" D |
3.00 |
2.95 |
2.90 |
2.85 |
2.80 |
2.30 |
| MAG-X |
Wht HI-NRG Mag & Hook * |
37 lbs |
1 ¼" D |
7.50 |
7.00 |
6.50 |
6.00 |
5.50 |
5.00 |
| MG-NT |
Nametag Magnet Set |
9 lbs. |
1/2" x 1 3/4" |
2.00 |
1.75 |
1.65 |
1.55 |
1.45 |
1.20 |
| MAD |
Magnet mount base |
5 lbs |
2" D |
1.00 |
.90 |
.60 |
.55 |
.50 |
.30 |
Caution: Mounting surfaces vary considerably; always test for your application. These are considered permanent
magnets, but over time magnets may loose effectiveness. Test frequently to determine if sufficient power still
remains. "Holds up to" is a relative measurement of strength based upon the ideal material (¼" steel plate)
under laboratory conditions. All magnets have steel cases except MAS and MAL.
* Not pictured, similar to MAG-L.
** Not pictured, similar to MAR-H.
|
|
